History of Safes

In centuries past, humankind worshipped fire because they feared it. They saw it ravage palaces and dwellings
with devastating results. So much of the written records of early human civilization are gone because of the lack
of protection of these documents.

Through the ages, humankind has sought to protect their possessions from the terror of fire. The Egyptians
buried their scrolls deep in the pyramids. The Assyrians buried duplicates of important documents at separate
locations. The Greeks carved their important records on ivory slabs.

When no record material proved suitable for protection against the destruction by fire, they turned their talents to
the development of protective devices to house records. Julius Caesar filed his records in strong, iron boxes but
found that the metal readily conducted the heat of a fire. Feudal lords build underground vaults and stationed
trusted guards for their protection. Merchants of the 15th Century developed the treasure chest of pirate story
fame, made of oak and banded with iron.

After 1830 came the iron “safes” with inner walls of stone, plaster or pairs, wood, cement, brick, asbestos, mica,
alum, chalk, clay, or simply dead-air space.

The first standardized tests for the adequacy of safe protection were not made until 1917, however. These tests
caused radical changes in safe construction because they proved many of the old theories of protection to be
false. Safe equipment today, thanks to technological progress and thorough testing, can provide modern
business with record protection like never before known in the history of civilization.

Selecting the Right Safe is an Important Decision!

The selection of a safe is a more serious obligation than the selection of other types of office equipment. If a
chair, desk, or printer does not do what it was supposed to do for the customer, an adjustment is easily made. A
replacement or an alteration can be made and the only harm done is a little delay and some annoyance.

But what happens when the selected safe fails to perform satisfactorily? It can only be tested by fire! After the fire,
unfortunately, it is too late to make replacements and adjustments. Statistics show that the chances are almost
50-50 that a business will survive a fire!

Any Safe is Safe – Sometimes

Every safe, regardless of whether it has a specific rating or not, and regardless of its age or condition will resist
some type of exposure to fire and will protect its contents.

Ordinary steel files will come through some fires satisfactorily. In fact, unprotected records on a shelf or on top of
a desk could survive an office fire. The important factors --  how hot a fire and for how long – are the important
issues.

Safes Have Certified Security

No firm can afford to test its own safe equipment in an office
fire. Consequently, new models of safe are given extensive
tests by manufacturers and by private testing laboratories
before they are put on the market. Established safe models are also taken off the regular assembly line
periodically and given tests to see that they still conform to their ratings.

The Underwriters Laboratories, sponsored by the National Board of Fire Underwriters, is the primary testing
agency. It is chartered as a nonprofit organization for the examination and testing of devices, systems, and
materials for safety.

Underwriters Laboratories test the safes supplied to them by manufacturers and authorize the use of a series of
labels according to the types of test which the equipment has successfully passed.

How to Make a Safe

The modern fire safe depends on a blanket of steam to protect the documents within it. The common insulation
elements like glass wool, shiny fooils and the others used in refrigerators, stoves, and home construction give
little protection against the intense and prolonged heated developed in a building fire.

The older safes utilized free moisture retained in the cement and water mixture used for insulation. This water
evaporated over the years and with it went the potential steam protection. This free water also made damp safe
interiors, musty papers and rust. Newer formulas and treatments produce a safe insulation with the water
retained in permanent crystalline form. As the heat increases during a fire, these crystals turn to water and then
to steam which blankets and cools the interior of the safe.

The insulating element of the safe can be made in either one of two methods. It may be cast in a one-piece,
oven-dried monolith, then the metal shell built around it. The second method is to form the metal shell first, then
pour the insulation mixture into the shell.

Sudden heat changes during the course of a fire sometimes cause safe to explode. The explosion is caused by
an accumulation of hydrogen. In the manufacture of a modern quality safe, provisions are made to eliminate this
hazard.

Remember the Date, 1917

It was not until 1917 that safes were given any reasonable tests for protection against fire hazards. The results of
the first standardized tests proved that many of the old theories about adequate protection were false. After the
test, manufacturers changed construction methods radically.

A massive, heavy safe looks like it can give plenty of protection. But, if it is old, it probably lost all of the fire-
protective properties it ever had. If it was made before 1917, it never had some of the protection we consider
necessary today!

Most safes made before 1917 we insulated with plain water and cement. When the free water evaporated, there
was none left to make the steam blanket which protects the records from heat.

Older safes depended on supporting strength on their outer shells alone or on heavy bands at the front and
back. At the comparatively low temperature of 1,000 degrees, this supporting metal lost as much as 70% of its
strength. With the support weakened, the safe would warp and allow the heat to enter. Any drop during the
course of the fire, of course, would burst the safe and open the contents to flames.

Safe construction methods have changed radically since the test on safes have been conducted scientifically. In
the older safes, the heat was rapidly transmitted to the interior of the safe by its metal hinges, spindles and
handles. Openings between the door and frame often permitted direct access for the heat of a fire. Solid steel
fittings in the door and jamb conducted the heat quickly.

Doors are now tongue and grooved in a design that impedes the path of the heat. Casings for the insulation are
of light material and assembly methods are engineered so that there is a minimum of heat penetration to the
interior of the safe.

Relocking Devices

Knocking off the combination lock and driving out the spindle was a favorite method of opening a safe at one
time. Safes can now be equipped with a relocking device, however, which foils this practice. The relocking
mechanism is very sensitive to any tampering with the combination lock and any pounding will immediately
deadlock the bolt work of the safe.

A safe having an Underwriters’ Laboratories labeled relocking devise is eligible, under certain conditions, for a
reduction in burglary insurance.

There are occasions within the business office where the combination of the safe is known only by one or a few
persons, yet a number of employees are required to work with the contents of the safe.

An older method of dealing with this problem is the use of a separate key-locked inner door. Authorized
employees are issued keys to the inner door but do not know the combination to the safe. The inner door has
dropped in popularity, but it is still available on some safes.

The modern approach to the same problem is locked interior compartments. Employees are issued keys to the
compartments they are entitled to enter. An alternative method used on some safe models is a separate key
lock in the bolt work of the safe. After the combination is worked, the safe can be opened with a key. Turning the
combination dial makes the key inoperative.

WHAT YOU NEED TO KNOW ABOUT THE VALUE OF YOUR RECORDS

Many business people take their record keeping for granted. It is a necessary nuisance. It is not that they think
records are not important but too many business people fail to realize that their business records are what keep
them in business.

For over 40 centuries, humans have been protecting their personal and valuable possessions in strong boxes. It
has been a relentless challenge for the designers and manufacturers of safes to outwit the safe crackers and
burglars of the world.

Today, the science of safe and vault makers can provide protection against virtually any conceivable hazard –
save perhaps a direct hit from an atomic bomb.

Despite the remarkable advances in the design and production of protection equipment, it is estimated that
more than 75% of the equipment in use by businesses today are incapable of protecting the valuables inside
the safe.  An additional mountain of vital business records has no protection whatsoever!

When Is a Safe NOT a Safe?

There is confusion of terms in the use of fire and theft resisting equipment. This confusion in terms leads
many users to believe that they have more protection than they really have. It is natural for customers who have a
“safe” to believe that anything they put into it will be “safe.” Our job is to be sure that our customer recognizes
the type of protection they are getting with the equipment they purchase.


---------------------------------------------------------------------------------------------------------------------------------------------

This is a FIRE safe.

It gives FIRE protection and is engineered and insulated
to protect its contents against HEAT.
It is NOT designed to keep out an experienced burglar.










----------------------------------------------------------------------------------------------------------------------------------------------

This is a BURGLARY RESISTANT safe.

It is engineered and constructed to protect cash and
valuables against experience burglars.
It gives little protection against heat.










-----------------------------------------------------------------------------------------------------------------------------------------------

This is a COMBINATION (COMPOSITE) safe

It gives both burglary and fire protection. The outer materi
al is metal and the inner layer is a special composite material
that provides both burglary and fire resistance.











-----------------------------------------------------------------------------------------------------------------------------------------------
it's degree of burglary protection.

VAULTS
Underwriters Laboratories assigns one of four ratings to vault doors and
modular vault panels based on expert burglary attack with cutting torches,
fluxing rods, portable electric power tools, portable hydraulic tools and
common mechanical tools for a specific time period. UL labels are
mounted on the vault door and individual modular vault panels. When the
UL rating for the door and panels are different, the overall vault rating is
determined by the least burglary resistive component.




The ratings are:

Class               Attack time

M         15 minutes attack time
I         30 minutes attack time
II         60 minutes attack time
III       120 minutes attack time

Vault construction
Vault doors that are not UL-listed are evaluated based on the construction and thickness of the steel
incorporated in the door. For non-UL listed vaults or panels, construction of the vault floor, ceiling, and walls is
evaluated in terms of their thickness, and construction (steel, masonry, cinder block, filled cinder block, or
reinforced concrete). Vaults constructed of poured concrete with reinforcing rods must meet the standards of
construction established by the American Society of Testing and Materials to assure appropriate burglary
resistant protection, but are not rated by U.L.

Doors and vault construction that are not burglary resistant may be listed as fire resistant and containers with
these components should be used for storage of records and other valuable papers. Vaults constructed with
masonry block, brick, or steel are not typically acceptable for burglary protection, except when values are low and
other burglary protection compensates for the deficiency.

When the electricity fails and phones are out, your safe or vault is your last defense against a burglar



This page contains excerpts from from the “National Stationery and Office Equipment Association”
Elie's lock & key
Since 1969
Call Us
for
Quick & Reliable Service
818-882-2525
Residential
Mobile Services
Commercial
Automotive
  • Chatsworth
  • Northridge
  • Porter Ranch
  • Granada Hills
  • Canoga Park
  • Mission Hills
  • Woodland Hills
  • North Hollywood
  • Van Nuys
  • Studio City
  • Sherman Oaks
  • Simi Valley
  • Winnetka
  • Encino
  • Pacoima
  • Calabasas
10180 Mason Ave. Chatsworth Ca 91311                                     Tell: 818-882-2525                                                     Lic# LCO4209